BRIGHT 2000

DESCRIPTION:

It’s a super gloss enamel used as a finish coat on interior and exterior surfaces and produced by high quality Resins according to the Egyptian standard No 793/1990.                                                     

CHARACTERISTICS  Bright 2000 gives:

Excellent adhesion
Coverage : from 9-10 m?/Kg
High gloss and solid surface
High Resistance to weathering and yellowing.                

Drying Time:

Set to touch after 3 – 4 hours.
Can be Re coated after 12hours.

APPLICATION:

Cleaning the surface from grease, fats and Damaged parts.
Applied by brush, roller or spray gun.

PACKING:
1 kg Cans , 5 kg Gallons , 20  kg Pails.

DENISTY:
1.1 kg./L

COLOUR:
White and all colours are available.

SHELF LIFE:
Two years in a cold and dry place.

BRIGHT 5000

DESCRIPTION:

Non yellowing and high  gloss super enamel, super quality paint to interior and exterior coating based on high quality alkyd, exceeds the Egyptian standards
No 793 / 1990.

CHARCTERSTICS :

* Good yellowing resistance.
* Excellent hiding power.
* Excellent colour retention.
* High gloss and good gloss retention.
* Excellent weathering resistance.

DRYING TIME:
Dry to touch after 4 h. and can be re-coated after 18 h

COVERAGE:
10-12 m? /kg                                                         

APPLICATION :

*Clean the surface from grease fats and dust.
* Stirr the paint before use.
*Use ISIPAC 108 thinner.
*Can be applied by roller, brush or  spray.

PACKING:
1 kg cans , 5 kg gallons and 20 kg pails.

DENISTY:
1.2 kg./L

COLOUR :
White and any other colours.

SHELF LIFE:
24 Months in cold and dry place.

SUPER MATT

DESCRIPTION:

A high flat enamel quality paint based on non-yellowing alkyd resin for exterior & interior  use Can be directly applied on walls, wooden surfaces ,meets Egyptian standed No 1757 / 1989.

CHARACTERSTICS:

* Good adhesion                      
* High-hiding power .
* Good colour retention .
* Easy to wash with water .

DREYING TIME :
- Surface dry after 1 hour & dry to re-coat  after 16 h. at 20? c

APPLICATION:
- The surface must be free from oil , waxs and dust.
- Wood primed with ISIPAC under coat.
- Steel primed with ISIPAC primer 2000.
- Use ISIPAC thinner 3-8 % by weight.
- Can be applied by roller, brush and spray.

COVERAGE :  
9 m ?/kg 35 (μm)  

PACKING :
1kg cans, 6 kg gallon, 25 kg pails.

 DENISTY:
1.3 kg./L

COLOUR :
White and other colours

SHELF LIFE :
24 months in a cold & dry place.

STOVING ALKYD-MELAMINE ENAMEL

DESCRIPTION:
Paint based on a mixture of alkyd and melamine  resins.

Uses:
For metallic furniture, kitchens, cooking and domestic applications.

Gharacterised by :
High brightness, hardness and excellent impact resistance.

Specifications:-
1- Solid content : 62% (by weight.)
2- Curing time: 20 min at (120?C – 140?C)
3- Viscosity : 120 sec/ cup 4/at 25?C
4- Gloss : 90
5- Direct impact:60 pounds
6- Indirect impact :25 pounds
7- Cross cutter test: excellent
8- Flash point :20?C
9- Thinned viscosity:30-35 sec/cup 4/at 25C
10- Coverage rate : 10-12 m? /L (D f t 40 micron)

Method Of Application :
1-surface must be free from greases, dirts, oil and rust.
2-prime coat must be applted before finish coat by a spray gun.

Recommended Thinner:
Thinner ISIPAC 1020        

Amount Of Thinner:
25 % by volume

SHELF LIFE:
12 months in a cold and dry place.