Cellulosic putty
DESCRIPTION:
High pigmented nitrocellulose
putty.

Characteristics:
* Excellent adhesion on wood
and primed steel surfaces.
* Good sandability.
* Good filling properties.
* Easily applied by putty
knife.
* Suitable for over coating by
poly-urethane, nitro cellulose
and acid curing coats.
Drying time: at
20 c?
* Tack free : 10 min.
* Sandability : 2 hours minimum.
Covrage:
? 6 - 8 m? / kg. (30 ?)
Colour:
Light Grey
Shelf Life:
24 months in a cold and dry
place.
Thinner:
0 - 50 % by weight using isipac
thinner.
ISIPAC Sealer
DESCRIPTION:
A high solid nitrocellulose
sealer.
Characteristics:
* Excellent adhesion on wood .
* Good
filling properties .
* Excellent
sandability.
* Very fast
drying .
* Never
clogs the sand paper.
Drying time:
* Dust free 5 min.
* Take free
10 min.
Colour:
Clear
Gloss:
flat
Solid content:
50% +1% by weight .
Viscosity:
180-200 sec.
Density:
opprox. 0.94 kgm./L
Theoretical:
9m?/kgm.
Sanding after:
2 hours
Over coating interval:
min. 2 hours.
Flash point:
20 C?
Shelf Life:
12 months in a cold and dry
place.
Substrate Conditions:
Wood surface should be dry and
free from oil,dust and any
contamination
Instruction for use:
Stir well before use.
The
temperature of the paint should
be above 10 C?
Recommended thinner:
Isipac thinner 9580
Volume of thinner:
25-35% by weight .
Application viscosity CF4:
20-30 sec.
ISIPAC Surfacer
DESCRIPTION:
Pigmented nitrocellulose
surfacer on wood .
Characteristics:
* Excellent adhesion on wood .
* Good filling properties .
* Excellent sandability.
* Very fast drying .
* Never clogs the sand paper.
Drying time:
* Dust free 10 min.
* Take free
15 min.
Colour:
White
Gloss:
flat
Solid content:
50% +1% by weight
Viscosity:
highly viscous.
Density:
1.34 k./L
Theoretical:
10.6 m?/k. thikness 35 ?
Sanding after:
2 hours
Over coating interval:
min. 2 hours. mix. Month .
Flash point:
20 C?
Shelf Life:
12 months in a cold and dry
place.
Substrate Conditions:
Wood must be dry and free
from oil, dust and any
contamination .
Instruction for use:
Stir well before use .
The temperature of the paint
should be above 10 C?.
Recommended thinner:
Isipac thinner 9580
Volume of thinner:
30-40%
by weight .
Application viscosity CF4:
30-40 sec.
Nitrocellulsic Varnish For
Surfaces
Description:
A clear Varnish based on
nitrocellulose resin with
modified alkyd , gloss and flat.
Characteristics:
* High gloss retention .
* High
weathering resistance .
* For
exterior and interior use on
wooden surfaces.
Drying Time:
* Dry to Touch after 10 min.
* Dry to
Recoat after 12 hours.
Application:
- The surface must be free from
water, dust and fats
-Can be
applied by brush or air spry.
Coverage:
10-12 m˚ / kg.
Package:
1kg. Cans , 4kg. Gallons .
Shelf Life:
24 months in cold and dry place
.
FLOOR PAC Gloss Synthetic
Varnish
DESCRIPTION:
A clear varnish based on
modified alkyd resins for
interior & exterior use
according to the Egyptian
standard No 1122/1972.
CHARACTERSTICS:
* High gloss and gloss retention
.
* Good
weathering resistance .
* Suitable
for Interior & Exterior use on
wooden floors.
DRYING TIME:
Dry to touch after 3 hours and
dry to re – coat after 12 hours
at least.
COVERAGE :
10 –12 m? / kg
APPLICATION:
* The surface must be free from
water and dust
* Can be
applied by brush or airless
spray .
PACKING:
1 kg cans & 4 kg gallons&15
pails ( Gross Weight )
COLOUR:
Clear Varnish
SHELF LIFE:
24 Months in a cold and dry
place.
|